Tuesday, March 19, 2024
Welcome, Guest
Username: Password: Remember me

TOPIC: Feed Line Attenuation Calculator

Feed Line Attenuation Calculator 14 years 6 months ago #149

  • Asad Khan AP2ASD
  • Asad Khan AP2ASD's Avatar
  • OFFLINE
  • Senior Boarder
  • This is my picture from 1982/83.
  • Posts: 46
  • Karma: 0
Thought it might be useful to those experimenting.

www.ocarc.ca/coax.htm
Last Edit: 14 years 6 months ago by Asad Khan AP2ASD. Reason: correction
The administrator has disabled public write access.

Re: Feed line Attenuation Calculator 14 years 6 months ago #150

Assalamo Alikum Asad Bhai.
And Thank you for a nice link.
it is realy very helpfull to calculate the Rf related things.
By the way can i have your Tel. # and your, E-mail address ?


73s

This is AP2GH / HUSSAIN
Ghulam Hussain (AP2GH)
Mobile : 0300-8666169
The administrator has disabled public write access.

Re: Feed line Attenuation Calculator 14 years 6 months ago #151

  • Khalid Shoaib AP2MKS
  • Khalid Shoaib AP2MKS's Avatar
AP2GH !

Does it cover RF issues as well?? (I mean AP2RF)

MKS
The administrator has disabled public write access.

Re: Feed line Attenuation Calculator 14 years 6 months ago #152

RF can make a problem in any where.
My FT-897D with AT-897 tuner is giving problem, i asked
on forum, every answer was aboput RF, RF is giving problem.
The remiday is properly ground, properly sheileded and should be properly Synchronize with other, other vise it can give you a big problem.

Anyway, if you did all above with it, It cover RF.

However, Rf is in the shack now.


73
GH
Ghulam Hussain (AP2GH)
Mobile : 0300-8666169
Last Edit: 14 years 6 months ago by Ghulam Hussain AP2GH.
The administrator has disabled public write access.

Re: Feed Line Attenuation Calculator 14 years 6 months ago #154

  • Asad Khan AP2ASD
  • Asad Khan AP2ASD's Avatar
  • OFFLINE
  • Senior Boarder
  • This is my picture from 1982/83.
  • Posts: 46
  • Karma: 0
What do you mean RF? Are you talking about stray current or RFI? For both you need to ground your antenna, the coax shield, the power supply. Unfortunately, not a single house in Swabi has been grounded. I hired a noted electrician for my house's setup. He's been in the business since I remember. Upon my last visit, I experienced electrical shock on computer CPU, stabilizer, PS and radio. I went over to him and asked him if he has run a grounding wire. He said he would have done so if I had asked and that he has 'never' done any. How terrible!

73
Last Edit: 14 years 6 months ago by Asad Khan AP2ASD. Reason: correction
The administrator has disabled public write access.

Re: Feed line Attenuation Calculator 6 years 11 months ago #441

ALL GROUNDS SHOUD HOOKED WITH ONE COMMON GROUND TERMINAL
73's
AP2MQ
The administrator has disabled public write access.
Time to create page: 0.259 seconds